Recent content by millsusaf

Re: how do the speed shooters get there guns to run light lo I guess I got lucky, mine runs load I run through it. Sent from my DROID BIONIC using Tapatalk 2

IF it can be welded, have them put a full tang on it. Sent from my Xoom using Tapatalk 2

I use a LA Police Gear jumbo bail out bag. http://www.lapolicegear.com/jumbo-bailout-bag.html It works great and it also doubles as a 3-gun bag. The only thing I wish it had was a wider opening. Sent from my DROID BIONIC using Tapatalk 2

I typically carry a Kahr CW9, a Kahr PM9 or a G19 depending on the situation. Sent from my DROID BIONIC using Tapatalk 2

Re: New SPX and owner new to semi-auto shotguns Welcome to the site. Here is how it should work. With the bolt closed, load the tube. Then you pull the bolt handle back all the way and release it. That should pull a round out of the tube, put it on the lifter and then push it into the...

Re: Waiting on an SPX Welcome to the site! The box should have a manufactured date on it. Maybe they will look it up and tell you. You could also probably get the serial number and Mossberg may tell you the production date. Sent from my DROID BIONIC using Tapatalk 2

Re: Reloading goal - Low recoil slug Good points, thanks. You are right, shooting for load testing HAS to be a completely different thing than normal shooting.

I shoot in the tac-limited division and run a 930 SPX with an 18" barrel. I really don't see the benefit of a longer barrel for the distances we are shooting. The only mods I have done so far is a GG&G hi vis follower, a Brownells ext. safety and added a rail to the forearm for a Magpul AFG...

Re: Reloading goal - Low recoil slug Thanks! Is there any concern regarding if the load is too light as it pertains to chamber pressure? For instance, if the load is too light and the slug does not make it out of the barrel, all that pressure instead of going out the barrel is now solely...

Re: 930 SPX Shell lifter stuck Definitely send it back, that is not normal. Sent from my DROID BIONIC using Tapatalk 2

The only issue I could see with that would be because of poor maintenance and lack of planning. My 930 has been solid and is a great shooter. Sent from my DROID BIONIC using Tapatalk 2

Water Milk Beer/wine/mixed drinks Sent from my DROID BIONIC using Tapatalk 2

Re: Reloading goal - Low recoil slug Thanks for replying, that sounds like a solid plan. Oli, what reloading manual do you recommend that has slug data in it? Sent from my DROID BIONIC using Tapatalk 2

I have been using Winchester Ranger 1oz low recoil slugs for 3-gun competitions and have good success with then. I am using a Mossberg 930 SPX (smooth barrel) and need a decently accurate, low recoil ~1200fps recipe out to 100 yards. I am planning on using Lee 1oz slugs but everything else is...

1. Can you load seven 2 3/4" shells in your 930 SPX - Yes 1A. If "Yes", what is the length of the spring and what kind of ammo. - Factory length and various kinds of ammo, all has worked. 2. Can you load seven 3" shells in your 930 SPX - N/A, have not tried nor do I plan to. 3. Are you using...