Dixie3gun .22LR Aug 3, 2019 #1 I need to shorten the stock on my 930 JM. Has anyone done one that can offer tips, tricks, or advice to make it easier or avoid problems ??? Might do a video of my cutdown if I can get enough information.
I need to shorten the stock on my 930 JM. Has anyone done one that can offer tips, tricks, or advice to make it easier or avoid problems ??? Might do a video of my cutdown if I can get enough information.
fellmann Esoteric Supporter Aug 3, 2019 #2 I shorten my 590A1 stock in a band saw. Cut 3 cm ( 1.18 " ) http://mossbergowners.com/forum/index.php?threads/my-mossberg-590a1-mod.18858/#post-265231 There is lesser room for shorten the 930 stock. Maybe this link can help a bit.. https://www.shotgunworld.com/bbs/viewtopic.php?f=58&t=211354
I shorten my 590A1 stock in a band saw. Cut 3 cm ( 1.18 " ) http://mossbergowners.com/forum/index.php?threads/my-mossberg-590a1-mod.18858/#post-265231 There is lesser room for shorten the 930 stock. Maybe this link can help a bit.. https://www.shotgunworld.com/bbs/viewtopic.php?f=58&t=211354
R Rob72 .270 WIN Sep 20, 2019 #3 Late reply, but pretty much the gospel for shortening without major work to the spring tube: https://www.shotgunworld.com/bbs/viewtopic.php?f=58&t=211354
Late reply, but pretty much the gospel for shortening without major work to the spring tube: https://www.shotgunworld.com/bbs/viewtopic.php?f=58&t=211354
fellmann Esoteric Supporter Sep 20, 2019 #4 Rob72 said: Late reply, but pretty much the gospel for shortening without major work to the spring tube: https://www.shotgunworld.com/bbs/viewtopic.php?f=58&t=211354 Click to expand... Thats what i said
Rob72 said: Late reply, but pretty much the gospel for shortening without major work to the spring tube: https://www.shotgunworld.com/bbs/viewtopic.php?f=58&t=211354 Click to expand... Thats what i said
SWIGIN .410 Sep 20, 2019 #5 I cut 9/16'' off my 935 stock then used my lathe and turned half the threads out of the nut and then I made a shorter spacer after I cut the spring tube. Not very hard to do but having a lathe helps. http://mossbergowners.com/forum/index.php?threads/shortened-the-935-stock-tonight.17660/
I cut 9/16'' off my 935 stock then used my lathe and turned half the threads out of the nut and then I made a shorter spacer after I cut the spring tube. Not very hard to do but having a lathe helps. http://mossbergowners.com/forum/index.php?threads/shortened-the-935-stock-tonight.17660/