Mossberg Compliant Nordic Components Product Reviews
- Thread starter DHonovich
- Start date
Nordic Components Charging Handle
First Impressions: The Nordic Components charging handle appears to be very well made and is surprisingly light. I did not measure it on a gram scale but it is very close to the stock charging handle that came with my Mossberg 930 autoloader.
Installation: You simply pull out your stock charging handle and insert your new Nordic Components charging handle.
Use: Well after throwing a ton of lead down range with the Nordic Components charging handle I can safely recommend this product for any Mossberg 930 Autoloader looking for a better feeling charging handle. The charging handle is well built, very ergonomic while providing great grip even when wearing thick gloves, light enough to not cause the bolt to jam when the Mossberg 930 Autoloader starts getting dirty and for me looks as though it should have came directly from Mossberg with it installed.
:twisted: :twisted: :twisted: :twisted: :twisted:
First Impressions: The Nordic Components charging handle appears to be very well made and is surprisingly light. I did not measure it on a gram scale but it is very close to the stock charging handle that came with my Mossberg 930 autoloader.
Installation: You simply pull out your stock charging handle and insert your new Nordic Components charging handle.
Use: Well after throwing a ton of lead down range with the Nordic Components charging handle I can safely recommend this product for any Mossberg 930 Autoloader looking for a better feeling charging handle. The charging handle is well built, very ergonomic while providing great grip even when wearing thick gloves, light enough to not cause the bolt to jam when the Mossberg 930 Autoloader starts getting dirty and for me looks as though it should have came directly from Mossberg with it installed.
:twisted: :twisted: :twisted: :twisted: :twisted:
Nordic Magazine Extension Tubes
+5 (~11.75)
+4 (~10.25")
+3 (~8.5")
+2 (~6")
First Impressions: The finish on the Nordic Components magazine extension tubes is nearly identical to the factory finish on my Mossberg 930 Autoloader. This is a huge plus for me as I like parts that look as though they should have came directly from Mossberg with them installed. Additionally, all 3 parts of the setup seem well made and screw into each other smoothly.
Installation: You simply remove your factory magazine cap and assembly, screw on the Nordic Components system, measure and cut the supplied spring to approximately 10-16" longer than the factory magazine tube + the Nordic Components extension (I cut mine to ~10" to achieve full capacity and function) and finally you screw on the cap.
Use: With each of the Nordic Components magazine extension tubes I was able to achieve the indicated increases in magazine capacity. My Mossberg 930 Autoloader performed flawlessly while loading and firing with the newly installed Nordic Components magazine extension tubes. I really can't say enough about the fit, finish and functionality of these tubes; they are great! They work exactly as they should and I highly recommend them to anyone looking to increase the capacity of your Mossberg 930 Autoloader.
[youtube]http://www.youtube.com/watch?v=GP3chtk5QwA[/youtube]
:twisted: :twisted: :twisted: :twisted: :twisted:
+5 (~11.75)
+4 (~10.25")
+3 (~8.5")
+2 (~6")
First Impressions: The finish on the Nordic Components magazine extension tubes is nearly identical to the factory finish on my Mossberg 930 Autoloader. This is a huge plus for me as I like parts that look as though they should have came directly from Mossberg with them installed. Additionally, all 3 parts of the setup seem well made and screw into each other smoothly.
Installation: You simply remove your factory magazine cap and assembly, screw on the Nordic Components system, measure and cut the supplied spring to approximately 10-16" longer than the factory magazine tube + the Nordic Components extension (I cut mine to ~10" to achieve full capacity and function) and finally you screw on the cap.
Use: With each of the Nordic Components magazine extension tubes I was able to achieve the indicated increases in magazine capacity. My Mossberg 930 Autoloader performed flawlessly while loading and firing with the newly installed Nordic Components magazine extension tubes. I really can't say enough about the fit, finish and functionality of these tubes; they are great! They work exactly as they should and I highly recommend them to anyone looking to increase the capacity of your Mossberg 930 Autoloader.
[youtube]http://www.youtube.com/watch?v=GP3chtk5QwA[/youtube]
:twisted: :twisted: :twisted: :twisted: :twisted:
S
SHOOTER13
Guest
Look like some real nice components Doc...and great pix as always !!
VitSports6
20g
DHonovich said:Nordic Components Shotgun Tube Clamp
Nordic Components Extended Cap (Adds 3/4" to the tube)
I'm looking to purchase the +1 from NC, What is the purpose of the Extended Cap? and is it necessary to buy along with the +1?
Thanks
VitSports6
20g
I see, Thanks, It looks like the +1 has no provisions for an extended cap.
Thanks again.
Thanks again.
So I handled both the 20" and 18.5" Mossberg 590A1 and I must admit that I enjoyed the feel of the 18.5" better. This is not too surprising as I am smaller framed guy. Just got a quick question. I love the look of the magazine tube sitting flush with the barrel on the 590A1 shotgun and the added capacity is even more of a plus.
However, I am wanting to make a compromise as I really did feel like the 20" was unwieldy (and this was unloaded, I am sure after the accessories and full capacity the added weight would have an ever greater effect on me), would the NC +1 mag extension fit on the 18.5" 590A1 without any problems and fit relatively flush (Do not need it perfectly flush, just close enough and not past the barrel)?
I was unable to measure the distance from the end of the magazine tube to the front of the barrel on the 18.5", hence why I am asking the question!
I really like the idea of an 18.5" 590A1 with the NC +1 being the perfect compromise between compensating for capacity (6+1 sounds great to me) and overall length.
Thank you for any responses.
However, I am wanting to make a compromise as I really did feel like the 20" was unwieldy (and this was unloaded, I am sure after the accessories and full capacity the added weight would have an ever greater effect on me), would the NC +1 mag extension fit on the 18.5" 590A1 without any problems and fit relatively flush (Do not need it perfectly flush, just close enough and not past the barrel)?
I was unable to measure the distance from the end of the magazine tube to the front of the barrel on the 18.5", hence why I am asking the question!
I really like the idea of an 18.5" 590A1 with the NC +1 being the perfect compromise between compensating for capacity (6+1 sounds great to me) and overall length.
Thank you for any responses.
