Thanks, I looked at the last time I posted here and dang it was back in 2016, time just flies by. I keep telling people I'm a Perennial, everyone...
O.K. lets see if I can run through this, My opinion is the Federal mini's are better in part...
Exactly, what a dipstick. High brass at what velocity, many video's that are made with a bias against mini shell the guy uses some kind of high brass...
Added a few video's to last post, first video is the point, if mini shells work in your gun and the velocity is the same or close to what is shown,...
The TL-Racker puts the ring nut in the forend just like the middle picture on the amazon link shown below (i see it's Remington but it's the same...
The ring sets deep on the TL-Racker forend so a bar would have to be the exact width of the ring (nut), with the tube type tool just remove the...
It came with a Magpul MOE forend and stock I got for a 18.5 590A1, made of plastic but I've used it for years.
If you PM your address I will send one, when you are done just send it back.
In case anyone is interested I posted this on another forum, should be of interest here also as we are talking low recoil/mini shells etc. My 14"...
Warhammer, No problem I did not take the wrong way, correct I do not feel the 2 1/4" OO buys anything over the 15 pellet 1 3/4"...
The only thing I see with the 2 1/4" shells is in some guns they are more reliable than the 1 3/4" (mostly guns that will not run 1 3/4"), remember...
Double post, removed.
Now, mini shells can be tricky (good thing there are 9 in gun), double loading side saddle, I put the bottom row in just a little more than the upper...
I think you have the elastic loop type holder, not so good for this application. As far as pushing shell through holder with finger, that's O.K. but...
Just put it on the scale and I'm getting 8 pounds 9 oz, that's with 21 rounds, TL-Racker forend with batteries and stock.
Warhammer and anyone else, My normal setup with 2 3/4" would be first hole (muzzle end) brass on top and the balance brass at bottom. Reason for...
Your best bet is to go to the local gun store and handle many, fit is important and it has to fit you not somebody else. If you have a place local...
Not Warhammer but here is my 2 cents, After running the light for a few weeks now ( half dozen practice at 200rds per), take batteries out for day...
Mossberg did a factory Mod choke 14" barrel with Ghost Ring and bead sight for the https://www.mossberg.com/category/series/590a1-class-iii/ now...
I thought I would ask the question on this forum also, Would you or do you load your shotgun and more so the Shockwave with mini shells, if you...
Separate names with a comma.