#4 Buck shorty shells currently available on Federal’s website. Get ‘en while you can....
CanuckBuck, I had the same concern at first but I have never had any issue whatsoever with minishells while using the OpSol.
Yep. Lives in my Shockwave. Makes minishells feed with high reliability. Stays in place, even through hundreds and hundreds of shots. It’s a snap to...
https://www.targetsportsusa.com/challenger-super-shortshell-12-gauge-1-3-4-5-6oz-7-1-2-birdshot-cta12sm75-p-108956.aspx 7.5 Birdshot, but they are...
I believe that’s the right one. Check this post: http://mossbergowners.com/forum/index.php?threads/what-size-forend-tube-do-i-need.13033/
Hard to go wrong with Federal. If you're shooting 2 3/4", look at the LE Tactical Flite Control 00-Buck or the PowerShok 4-Buck shotshells. If you're...
Welcome! I agree with Ernst - shoot it a bit and get a feel for it, then decide on enhancements or modifications. You may even decide that you don't...
Welcome to the fold! I have a 12 gauge Shockwave with the Crimson Trace laser saddle and a TacStar 6-shell side saddle - they work just fine...
I recently picked up the Streamlight TL Racker forend with integral flashlight for my Shockwave. Love it. Prior to that I had a CDMG mount with a...
Very nice. I went with the SBL but am considering an upgrade. Please let us know how your sling selection goes!
I have a 12ga Shockwave with the red Lasersaddle. Mine came preinstalled, zeroed for 25 yards. I changed the windage and elevation so the laser beam...
Looks good! I went ahead and ordered the Bulldog nylon case for mine after seeing your pics. See? Already making friends and influencing people. ;)
Welcome! Don't neglect to share a picture of your own, we'd love to see it.
Get the Opsol ($17 direct from the manufacturer) and try the minishells. Even without a brace it is very manageable. I shoot the minishells...
I am using the S&J +1 and can just get nine 1 3/4" minishells in the tube, using the stock spring and the Derlin follower that came with the S&J. It...
Tool arrived today and was exactly what was called for. 10 minutes to do the swap. Thanks again folks for the help and advice.
Thanks all. I ordered a tube-style one from Amazon: https://www.amazon.com/gp/product/B002TUSDZI/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1. I...
Appreciate the offer, but I’d rather have my own for future needs. I found a couple on Amazon that claim to do the job. Can you tell me where you got...
Would anyone please recommend a removal tool/spanning wrench to take off the nut holding the forend on? I went to replace the stock forend with the...
I use minishells exclusively in my Shockwave. My setup is similar to yours. I keep mine “cruiser ready” with an empty chamber, 9 in the tube (I have...
Separate names with a comma.
