Search results

I'm thinking about replacing the OME stock and forend with a Magpul stock and forend on my 590A1. I know about removing the trigger group with a Magpul stock installed but was wounding, If there is any interference with the forend rubbing the heavy wall barrel when cycling the action.

Picked up my 590A1 with XS ghosts ring sight and after a good cleaning I went to the range and after about 30 rounds the gun started to miss picking up a shell from the magazine tube about one in five rounds. Then it started to increase to about every other round until it would not feed at all...

I just purchase a 590a1 with XS ghost ring sights 51771 that looks exactly like a Blackwater 51772 model, but the one I purchased is not marked with the Blackwater logo. Do they still produce the Blackwater or did my 51771 replace it?

How often if ever have you removed, cleaned, oiled and inspected the bolt return spring & plunger that's in the 930 stock?

Do you have a side saddle shell holder on you 930SPX and has it effected the functioning of your shotgun?

Have you had any FTE when using anything under 1200 fps out of the short barrel (18 1/2) 930 SPX. My 930SPX has been 100% except when using anything under 1200 fps then I'll get 2 or 3 out of 10 FTE.

It was with reduced recoil Fiocchi 00 buck 1150 fps. Of the 10 shells in the box 3 did not eject. When it malfunctioned the hull was half way out of the chamber and a new shell was out of the magazine jamed under the spent shell. To clear I just had to pull back on the bolt handle to complete...