Hey guys and gals, the rifle is ready for testing. We are very excited to start banging out these reviews for the parts that we have acquired. Here is a list of products that we used for building this rifle aswell as our other parts that will be reviewed, and link to all parts
Upper:
BCM Stripped Upper receiver -
http://www.bravocompanyusa.com/BCM-Upper-Receiver-assembly-M4-Flat-Top-p/bcm4-ur-m4.htm
Lantac E-BCG556 (bolt carrier group) -
http://www.lantac-usa.com/AR15-M16-M4-Rifle-Accessories/landing-page/556NIB.html
BCM Stripped 16inch BFH (Barrel Forged Hammered) Mid Length -
http://www.bravocompanyusa.com/BCM-BFH-16-Mid-Length-Barrel-Stripped-p/bcm-brl-s-mid-16 bfh.htm
Odin Works Kmod Handguard 12.5inch -
https://www.odinworks.com/KMod_Forends_p/f-12-km.htm
Odin Works Low Profile Gas block -
https://www.odinworks.com/Low_Profile_Gas_Block_p/gb-75.htm
AXTS Raptor Charging Handle (FDE) -
http://www.mossbergowners.com/forum/index.php?threads/axts-raptor-charging-handle.13943/
Lantac Dragon 556b -
http://www.lantac-usa.com/AR15-M16-M4-Rifle-Accessories/DGN556B.html
Lower:
Palmetto State Armory Stripped lower -
http://palmettostatearmory.com/index.php/catalog/product/view/id/10445/category/4282/
ATI Lower Parts Kit (minus Fire control group) -
http://www.impactguns.com/product.aspx?zpid=34578
Magpul MOE grip (FDE) -
https://www.magpul.com/products/moe®-grip-–-ar15-m4
Battlearms Safety -
http://www.battlearmsdevelopment.com/bad-ass-fde-ambi-safety-selector-ar15-ar10r-cerakote-magpul-fde
BCM Mil spec Stock Mounting kit w/ H1 buffer -
http://www.bravocompanyusa.com/Stock-Hardware-Mounting-Kit-Mil-Spec-p/bcm-stock-hardware-kit.htm
Magpul CTR Stock Mil Spec (FDE) -
https://www.magpul.com/products/ctr®-carbine-stock
Hyperfire EDT trigger -
http://www.hiperfire.com/hipertouchedt.html
Optic:
Meprolight M21 reflex sight -
http://www.meprolight.com/default.a...itemid={FD44627E-1FD3-4811-969B-D59CE751DD4A}
Flashlight:
Insight WML -
http://inforce-mil.com/wml.php
DSC_4932 by ACFOTOLABS, on Flickr
DSC_4930 by ACFOTOLABS, on Flickr
DSC_4926 by ACFOTOLABS, on Flickr
DSC_4925 by ACFOTOLABS, on Flickr
Other parts to be review that we have acquired:
VG6 Epsilon 556 - http://www.vg6precision.com/index.php?id_product=18&controller=product
PWS FSC556 - http://primaryweapons.com/muzzledevices/#.VRS-leHs3jU
PWS TRIAD Flash hider - http://primaryweapons.com/muzzledevices/#.VRS-leHs3jU
Rainier Arms XTC - http://www.aimsurplus.com/product.aspx?item=XRAXTC&name=Rainier Arms Xtreme Tactical Compensator XTC&groupid=579
A2 Flash hider
Streamlight TLR2 (flashlight/laser) - http://www.streamlight.com/en-us/product/product.html?pid=81
Primary Arms 1x6 - https://www.primaryarms.com/Primary_Arms_1_6X_Scope_with_ACSS_7_62X39_300AAC_p/pa1-6xakser.htm
First Range report: 4/2/15
Some pics the build are up. First 60 rounds through it at range for function check and make sure cycling right, also sighted in the M21 red dot. She is a beauty to shoot, every shot was smooth has like zero recoil with brake and carrier helping as well. I picked up every shell, and everyone that was ejected landed in the exact same pile at the 3:30-4:00 mark so perfect ejection for a Mid length gas system running a H1 buffer and standard buffer spring. Ammo was zqi ss109 and went bang zero complaint from that. Were almost 15 people at range and almost everyone one took a shot was were impressed. Next range day will be to do a 25/50/100 yard accuracy test then onto shooting some steel and video of the other brakes to try out. I have always shot a MB556K on my rifles and Lantac has changed the way i look at brakes, slightly less recoil, the recoil it does have goes straight into shoulder and dissipates. Only thing i see people not liking the Dragon for so far it that its not Suppressor compatible, but they are in the works i believe on one in the future. Going to pull apart carrier at 200-300 round make and see how easy it is to wipe down. More to come thanks for the interest on the build.
Upper:
BCM Stripped Upper receiver -
http://www.bravocompanyusa.com/BCM-Upper-Receiver-assembly-M4-Flat-Top-p/bcm4-ur-m4.htm
Lantac E-BCG556 (bolt carrier group) -
http://www.lantac-usa.com/AR15-M16-M4-Rifle-Accessories/landing-page/556NIB.html
BCM Stripped 16inch BFH (Barrel Forged Hammered) Mid Length -
http://www.bravocompanyusa.com/BCM-BFH-16-Mid-Length-Barrel-Stripped-p/bcm-brl-s-mid-16 bfh.htm
Odin Works Kmod Handguard 12.5inch -
https://www.odinworks.com/KMod_Forends_p/f-12-km.htm
Odin Works Low Profile Gas block -
https://www.odinworks.com/Low_Profile_Gas_Block_p/gb-75.htm
AXTS Raptor Charging Handle (FDE) -
http://www.mossbergowners.com/forum/index.php?threads/axts-raptor-charging-handle.13943/
Lantac Dragon 556b -
http://www.lantac-usa.com/AR15-M16-M4-Rifle-Accessories/DGN556B.html
Lower:
Palmetto State Armory Stripped lower -
http://palmettostatearmory.com/index.php/catalog/product/view/id/10445/category/4282/
ATI Lower Parts Kit (minus Fire control group) -
http://www.impactguns.com/product.aspx?zpid=34578
Magpul MOE grip (FDE) -
https://www.magpul.com/products/moe®-grip-–-ar15-m4
Battlearms Safety -
http://www.battlearmsdevelopment.com/bad-ass-fde-ambi-safety-selector-ar15-ar10r-cerakote-magpul-fde
BCM Mil spec Stock Mounting kit w/ H1 buffer -
http://www.bravocompanyusa.com/Stock-Hardware-Mounting-Kit-Mil-Spec-p/bcm-stock-hardware-kit.htm
Magpul CTR Stock Mil Spec (FDE) -
https://www.magpul.com/products/ctr®-carbine-stock
Hyperfire EDT trigger -
http://www.hiperfire.com/hipertouchedt.html
Optic:
Meprolight M21 reflex sight -
http://www.meprolight.com/default.a...itemid={FD44627E-1FD3-4811-969B-D59CE751DD4A}
Flashlight:
Insight WML -
http://inforce-mil.com/wml.php
DSC_4932 by ACFOTOLABS, on Flickr
DSC_4930 by ACFOTOLABS, on Flickr
DSC_4926 by ACFOTOLABS, on Flickr
DSC_4925 by ACFOTOLABS, on Flickr
Other parts to be review that we have acquired:
VG6 Epsilon 556 - http://www.vg6precision.com/index.php?id_product=18&controller=product
PWS FSC556 - http://primaryweapons.com/muzzledevices/#.VRS-leHs3jU
PWS TRIAD Flash hider - http://primaryweapons.com/muzzledevices/#.VRS-leHs3jU
Rainier Arms XTC - http://www.aimsurplus.com/product.aspx?item=XRAXTC&name=Rainier Arms Xtreme Tactical Compensator XTC&groupid=579
A2 Flash hider
Streamlight TLR2 (flashlight/laser) - http://www.streamlight.com/en-us/product/product.html?pid=81
Primary Arms 1x6 - https://www.primaryarms.com/Primary_Arms_1_6X_Scope_with_ACSS_7_62X39_300AAC_p/pa1-6xakser.htm
First Range report: 4/2/15
Some pics the build are up. First 60 rounds through it at range for function check and make sure cycling right, also sighted in the M21 red dot. She is a beauty to shoot, every shot was smooth has like zero recoil with brake and carrier helping as well. I picked up every shell, and everyone that was ejected landed in the exact same pile at the 3:30-4:00 mark so perfect ejection for a Mid length gas system running a H1 buffer and standard buffer spring. Ammo was zqi ss109 and went bang zero complaint from that. Were almost 15 people at range and almost everyone one took a shot was were impressed. Next range day will be to do a 25/50/100 yard accuracy test then onto shooting some steel and video of the other brakes to try out. I have always shot a MB556K on my rifles and Lantac has changed the way i look at brakes, slightly less recoil, the recoil it does have goes straight into shoulder and dissipates. Only thing i see people not liking the Dragon for so far it that its not Suppressor compatible, but they are in the works i believe on one in the future. Going to pull apart carrier at 200-300 round make and see how easy it is to wipe down. More to come thanks for the interest on the build.
Last edited: