1. Check out the Hot Deals section of the Marketplace forum to order an official Mossbergowners.com hat.

RANGE REPORT: Long Guns

Discussion in 'Long Guns' started by dirksterg30, Feb 14, 2011.

  1. oli700

    oli700 12g Supporter "Philanthropist"

    Messages:
    9,270
  2. John A.

    John A. I'm "THAT" guy Staff Member Global Moderator Moderator

    Messages:
    15,036
    I think you'll like them.

    I've never used their ejector/extractor spring. I wouldn't mind picking up a set for each of my AR's. (Yes, I have that much confidence in them)

    I don't believe they made them when I first started using their buffer springs.

    I just bought 2 sets of their buffer springs a couple weeks ago

    My lightweight coyote popper was just a little undergassed for the tubbs spring and wouldn't lock the bolt back on the last round, but functioned fine otherwise.

    So, I put the standard Carbine spring back in it, and put the Tubbs spring in my middy/rifle stock. (The one I had to enlarge the gas port size).

    I believe it will function well in it, and I kept the other in the SBR AR. It functioned fine and even has an H1 buffer in addition to the new spring.

    I'll test the middy/rifle stock combo with the new spring to ensure it works as it should with before putting it back in HD rotation, but I think it'll be fine. It felt good cycling it by hand at least.
    oli700 likes this.
  3. SHOOTER13

    SHOOTER13 Guest

    4/29/15...10am...Olympic Arms CAR-97...5.56x45mm...100 yards...iron sights...bench rested:

    [​IMG]
    [​IMG]

    [​IMG]
  4. LAZY EYED SNIPER

    LAZY EYED SNIPER Overwatch Staff Member Global Moderator Supporter "Philanthropist"

    Messages:
    21,109
    You're slipping brother, you missed the money all three times!

    ...nice shoot'n @SHOOTER13 ...
    MikeD, SHOOTER13 and Water Monkey like this.
  5. SHOOTER13

    SHOOTER13 Guest

    Yea...damn quarters are hard to hit !!

    :rolleyes:
    MikeD and LAZY EYED SNIPER like this.
  6. MikeD

    MikeD I'm Your Huckleberry Staff Member Global Moderator "Philanthropist"

    Messages:
    11,941

    I'll give you that but the $2 bill should have been a gimmie. LOL
    SHOOTER13 likes this.
  7. TomcatPC

    TomcatPC .270 WIN

    Messages:
    216
    Took the drive to the free range about 45 minutes away and made some noise. Shot one person trap with me throwing the clay pigeon and then shooting it. Had fun and did much better than last time. Think I'd do alright if someone else pulled too? Fired 50 shells of 12 Ga. from my 1920's Stevens 520, first time I ever fired it at a moving target, did alright, really starting to love this gun.
    Fired only 25 16 Ga. Shells from the 1936 Remington Sportsman/Model 11, did good, well at least good for me.
    And fired the 1920's Crescent Victor 16 Ga. 50 times and think I had the best time with that one.
    Mark

    [​IMG]
  8. LAZY EYED SNIPER

    LAZY EYED SNIPER Overwatch Staff Member Global Moderator Supporter "Philanthropist"

    Messages:
    21,109
    Looks like a great time...
  9. TomcatPC

    TomcatPC .270 WIN

    Messages:
    216
  10. 6MT

    6MT .410

    Messages:
    32
    My personal favorite sniper rifle. Although I have three different ones, this is my favorite right now. It shoots 1/4moa if I do my part.

    [​IMG]
  11. 6MT

    6MT .410

    Messages:
    32
    And here's the first group at 100 yards (actually it's in metres, I'm Canadian). This was after barrel break-in. Too bad for the flyer. It would have been under .40".

    [​IMG]
    Rossignol likes this.
  12. LAZY EYED SNIPER

    LAZY EYED SNIPER Overwatch Staff Member Global Moderator Supporter "Philanthropist"

    Messages:
    21,109
    Great lookin rifle.

    How does she print at distance?
  13. 6MT

    6MT .410

    Messages:
    32
    Still 1/2 moa or better out to 1200 metres, if I do my part.
    LAZY EYED SNIPER likes this.
  14. FullAuto556

    FullAuto556 .270 WIN

    Messages:
    108
    Man, that is a sick a$$ rifle!! I'm not really into "sniper" rifles per se so what I know about them could probably fill a thimble. My 700 w/ 4X12 Nikkon or that LR 308 you see as my avatar is about as sniper as I get. So what am I looking at? I'd really like some details on this rifle if ya wouldn't mind sharing i.e caliber, twist, action, barrel, bolt, brake and all the rest she's riding on
  15. 6MT

    6MT .410

    Messages:
    32
    The rifle is a PGWdi Coyote in .308. The scope is a new Sightron SVSSS 10-50x60 and the mount is a Near 1.25 milspec. Weight is 18.5lbs.. The barrel is a modest 24" long with 1:11 twist. The bipod is an LRA Light Tactical unit.

    Thanks for the interest.
    Last edited: Jul 21, 2015
  16. LAZY EYED SNIPER

    LAZY EYED SNIPER Overwatch Staff Member Global Moderator Supporter "Philanthropist"

    Messages:
    21,109
    Yup, it's a keeper...
  17. tattooo

    tattooo .30-06

    Messages:
    1,283
    Damnnnnnnn 1/4 MOA is no joke

    Sent from my SM-G925P using Tapatalk
  18. John A.

    John A. I'm "THAT" guy Staff Member Global Moderator Moderator

    Messages:
    15,036
    I've never had a gun that would do a 1/4 moa. I envy anyone that does. And respect the ones that can make it do it.

    I've always had to "settle" for anything under 1 moa and am more than content with such.

    Though I don't get out too far anyway. Where I shoot, 1 moa is meat on the table.

    I've never fired a gun more than 450 yards.

    Ever.
  19. dieselmudder

    dieselmudder .30-06 Elite Member "Philanthropist"

    Messages:
    2,199
    [​IMG]



    [​IMG]


    Who knew golf balls would splatter? apparently they will with Nosler Varmegeddon's though.
  20. dieselmudder

    dieselmudder .30-06 Elite Member "Philanthropist"

    Messages:
    2,199
    200 yard challenge today, 7 shots, two hits. With wind

    [​IMG]

Share This Page