Sonny Copper BB May 24, 2015 #1 I have taken the stock off my 930 and removed all the parts from the tube that holds the RETURN SPRING, PLUNGER & PINS; now, how do I remove the tube that appears to be threaded onto the rear of the receiver, thanks for any guidance.
I have taken the stock off my 930 and removed all the parts from the tube that holds the RETURN SPRING, PLUNGER & PINS; now, how do I remove the tube that appears to be threaded onto the rear of the receiver, thanks for any guidance.
S SHOOTER13 Guest May 25, 2015 #2 Welcome back Sonny !! Not sure which part you're talking about...got a picture ?
MikeD I'm Your Huckleberry Staff member Administrator Global Moderator "Philanthropist" May 27, 2015 #4 I would think you should just be able to unscrew it. Just do not apply enough pressure to bend or dent it. I have to remove the stock on mine this week to install a new part. I'll try to remove it and let you know.
I would think you should just be able to unscrew it. Just do not apply enough pressure to bend or dent it. I have to remove the stock on mine this week to install a new part. I'll try to remove it and let you know.