.243 100ATR ejector stuck

[Smitty in CT]

I have a 100ATR in. 243, it has been a great gun but I have a problem I haven't seen before.

The ejector "plunger" on the face of bolt is stuck down... the round extracts fine, but since the plunger is stuck down, I have to roll the gun over to get the round out.

I've tried soaking the bolt head in mystery oil but it's still stuck.... any suggestions??

Smitty

 

[LAZY EYED SNIPER]

Looks like your ejector spring may be broken or stuck.

If you look at the bolt head assembly you can push out the ejector pin to remove the ejector and spring for inspection. Once the pin is removed, both the ejector and ejector spring should slide right out. Take a look at the exploded parts diagram on pg. 15 of your owner's manual if you need a reference...