930_tactical
.410
need some help with a few issues
some of the below issues i found posts to and tried the advice and it didnt work, the other i couldnt find much on.
problem #1:
when i load the mag tube full and then pull the bolt back no round gets let out onto the lifter, i seen a thing on brownells that said to take it out and deburr it, i took it out and stoned all the burrs and sharp corners off, installed it and i still cannot get one to kick out onto the lifter unless i seriously slam the bolt back in a way i would just never do under normal conditions.
problem #2:
some times with loading the mag tube ill get to the 2 or 3ed round and it will act as if its full and will not let me load any more shells not sure whats hanging up inside but something its, i have a choat tube and spring.
problem #3
i have the factory spx extension tube and spring, from what i was told its a 7+1 i can only fit 6 in the tube 1 in the pipe, thats what choat claims but i have read people are getting 7 in the tube 1 in the pipe, i have read some people say their spring is 37" some say 35" should i have 37 or 35 in order to get 7+1 ?
some of the below issues i found posts to and tried the advice and it didnt work, the other i couldnt find much on.
problem #1:
when i load the mag tube full and then pull the bolt back no round gets let out onto the lifter, i seen a thing on brownells that said to take it out and deburr it, i took it out and stoned all the burrs and sharp corners off, installed it and i still cannot get one to kick out onto the lifter unless i seriously slam the bolt back in a way i would just never do under normal conditions.
problem #2:
some times with loading the mag tube ill get to the 2 or 3ed round and it will act as if its full and will not let me load any more shells not sure whats hanging up inside but something its, i have a choat tube and spring.
problem #3
i have the factory spx extension tube and spring, from what i was told its a 7+1 i can only fit 6 in the tube 1 in the pipe, thats what choat claims but i have read people are getting 7 in the tube 1 in the pipe, i have read some people say their spring is 37" some say 35" should i have 37 or 35 in order to get 7+1 ?