A hacksaw and a file is what I've always used to chop a barrel. If you have a vise, put the area you want to cut outside of the jaws, and use the side of the jaw as a straight/guide for the hacksaw. Then you can go over it with a file
A hacksaw and a file is what I've always used to chop a barrel. If you have a vise, put the area you want to cut outside of the jaws, and use the side of the jaw as a straight/guide for the hacksaw. Then you can go over it with a file
Hi Back to ya Scoop. . . . Love your area! When we lived in VA we did a LOT of camping up and down the Blue Ridge and on both sides of the Smokies. Have friends over in Marysville
@ Caddman - - - I LUV it when someone "thinks outside the box!" All I need to do now is go out and buy that pick-em-up truck.This is all much easier if you own a pickup truck. First, unload yer gun. Then lay it down on the tailgate and draw a line around the barrel.
Next, just hang yer arm out, and you drag that muzzle on the pavement as you drive.
Keep checking’ it, and it will soon be the right length!
By the way, this works with tube-fed guns too. (Take out that duck plug first, so it doesn’t catch on fire!)
If you’re in a hurry you can just drive faster; or if not, drive slower for a better finish on the muzzle.
(Not recommended during fire season.)
@ Bobster - -Thanx for the link! Would that I could imitate you! I'll probably just go (albeit carefully) with what I've got on hand. If I'm careful (realizing that 'Murphy's Law' is always in full effect) I have the files and a Dremel to dress up the muzzle and rib after I finish circumcising it.Welcome Aboard from another Bob!
I posted about cutting a barrel a little while back. Here is the LINK...
I have the files and a Dremel to dress up the muzzle and rib after I finish circumcising it.
Thanx Bobster - - Depot/Lowes have things I've never even heard of (and I've been a DIY homeowner for 35+ years). Based on your recommendation I'll certainly take a close look at this - for the price it may well be worth its price even if just for a 1-time use.Husky (ie: Home Depot) has this deburr tool for around $9. LINK I can't vouch for this particular unit as I use NOGA brand from MSC Industrial Supply. A deburr tool is highly recommended for anyone's toolbox.
View attachment 25611