Hi guys,
Just got my 930 put together and found that the seam between the factory mag tube and the nordic +3 extension is causing my factory follower to hang up a bit.
I initially had a GG&G front sling plate placed between the stock and nordic tube nut, but this seemed to just increase the gap between the two magazine tubes, so I removed it.
I'm curious if this is a common issue and if so, what's the fix.
I'm also having trouble getting the first round (of 7) to release from the magazine tube. I realize that my spring may be a bit too long causing too much pressure, but I don't want to cut it too short. As of now it extends 11.5" past the end of the tube.
A quick cell phone pic of the beast.
As always,
Thanks!!
Just got my 930 put together and found that the seam between the factory mag tube and the nordic +3 extension is causing my factory follower to hang up a bit.
I initially had a GG&G front sling plate placed between the stock and nordic tube nut, but this seemed to just increase the gap between the two magazine tubes, so I removed it.
I'm curious if this is a common issue and if so, what's the fix.
I'm also having trouble getting the first round (of 7) to release from the magazine tube. I realize that my spring may be a bit too long causing too much pressure, but I don't want to cut it too short. As of now it extends 11.5" past the end of the tube.
A quick cell phone pic of the beast.
As always,
Thanks!!