Took the DDI out today with a new optic, to sight in I was shooting prone from a rest. On two separate instances the recoil of the shot caused the trigger to reset, while I was still squeezing, resulting in unintentional double tap.
Looking for recommendations to cure this problem, I've thought of four possible solutions.
1) The stock is very short, maybe a longer LOP will change grip ergonomics, and prevent trigger reset.
2) Adding weight, So that it slows the recoil, and I can hold the trigger in the fired position, without resetting
3) Heavier hammer/trigger spring, less likely to squeeze off the next round unintentionally
4) Aftermarket, or adjustable trigger. This one has a mile of overtravel after the hammer falls. Less to no overtravel will prevent the reset of recoil.
Sent from my SM-G360V using Tapatalk
Looking for recommendations to cure this problem, I've thought of four possible solutions.
1) The stock is very short, maybe a longer LOP will change grip ergonomics, and prevent trigger reset.
2) Adding weight, So that it slows the recoil, and I can hold the trigger in the fired position, without resetting
3) Heavier hammer/trigger spring, less likely to squeeze off the next round unintentionally
4) Aftermarket, or adjustable trigger. This one has a mile of overtravel after the hammer falls. Less to no overtravel will prevent the reset of recoil.
Sent from my SM-G360V using Tapatalk